Model Number | Inlet Size (mm) | Max Feed Size (mm) | Output (t/h) | Motor Power (kw) | Adjustment Range Of Discharge Opening (mm) | Dimensions (mm) | Weight (t) |
PE-150×250 | 150×250 | 125 | 1-5 | 5.5 | 10-40 | 875×758×850 | 0.81 |
PE-150×750 | 150×750 | 125 | 5-16 | 15 | 10-40 | 896×745×935 | 3.8 |
PE-250×400 | 400×250 | 210 | 5-20 | 15 | 20-60 | 1450×1315×1296 | 2.8 |
PE-400×600 | 400×600 | 340 | 16-65 | 30 | 40-100 | 1565×1732×1586 | 6.5 |
PE-600×900 | 900×600 | 500 | 50-120 | 55-75 | 65-160 | 2305×1840×2298 | 15.5 |
PE-500×750 | 500×750 | 425 | 45-100 | 55 | 50-100 | 1890×1916×1870 | 10.1 |
PE-750×1060 | 750×1060 | 630 | 52-180 | 110 | 80-140 | 2450×2472×2840 | 28 |
PE-900×1200 | 900×1200 | 750 | 140-260 | 110 | 95-165 | 3335×3182×3025 | 50 |
PE-250×750 | 750×250 | 210 | 15-30 | 22 | 25-60 | 1667×1545×1020 | 4.9 |
PE-250×1000 | 1000×250 | 210 | 16-52 | 30-37 | 25-60 | 1530×1992×1380 | 6.5 |
PE-300×1300 | 300×1300 | 250 | 20-90 | 75 | 25-105 | 2720×1950×1600 | 11 |
PE-250×1200 | 250×1200 | 210 | 20-60 | 37 | 25-60 | 1900×2192×1430 | 7.7 |
Jaw Crusher
In autoclave aerated concrete production lines, the jaw crusher is mainly used to break and crush aerated concrete materials whose compressive strength is less than 320Mpa.
It has features of a big crushing ratio, high output, well-proportioned granularity, simple structure, easy maintenance, low operating cost, etc.
The motor drives the eccentric shaft rotating through the pulley to make the jaw work. The aerated concrete materials were broken into small pieces after squeezing, rubbing, and grinding, and then discharged from the discharge opening.
